Puro­lyt is a dis­in­fect­ant con­cen­trate which is used in pro­fes­sion­al hy­giene man­age­ment for dis­in­fec­tion of sur­faces, equip­ment/tools, wa­ter/li­quids and air.

Puro­lyt is pro­duced re­source-friendly in an elec­tro­chem­ic­al pro­cess from wa­ter + salt + elec­tri­city. Noth­ing else!

Puro­lyt can be ap­plied in a di­lu­tion by spray­ing, fog­ging, wip­ing, im­mer­sion or by dir­ect ad­di­tion to wa­ter/li­quids. For de­tailed in­form­a­tion, please refer to the op­er­at­ing in­struc­tions.
 
Application
For surface disinfection in greenhouses and agriculture, Purolyt can be used in the following processes:
Spraying
Cold misting
Wipe disinfection

Purolyt can be added directly for the disinfection of water and nutrient solutions. Since pathogens such as bacteria, fungi and viruses spread through the water used for irrigation, the water must necessarily be clean and free of germs.
Important instructions for use:
48 hours. Store in a tightly closed container and protect from UV rays.
Always use purified water (e.g. distilled water, deionized water or osmosis water) to spray / mist. Commercially available pressure sprayers from a minimum of 3 bar are recommended.
If plants are grown in artificial light, spraying / misting should be done shortly before or during the photoperiod, but always with the production lighting switched off.
The production lighting should remain off for 20-30 minutes after spraying. To keep the plants in the photoperiod during this period, a 4 Watt LED per 3 m2 is sufficient.
For outdoor use, it is recommended to choose only the morning or evening hours to spray / mist, in order to avoid direct sunlight / UV.